Maxum 2400 SC3 Especificaciones descargar pdf (Pagina 23)

Chapter 4: Propulsion & Related Systems

Fuel Fill and Vent

• The fuel fill fitting is marked “GAS”.

• The fuel tank vent is located next to the fuel fill.

• If you experience difficulty filling the fuel tank, check to see if the fuel fill hose or vent hose is kinked or col-

lapsed. If there are no visible signs of a problem, contact your local dealer.

Fuel Filters

• The fuel pickup tube (located inside the fuel tank) is equipped with a fine mesh screen filter.

• In addition, when supplied by the engine manufacturer, a fuel filter is installed on the engine.

• Periodically replace the fuel filters to make sure they remain clean and free of debris.

• Consult with your selling dealer or local marina concerning fuel additives that help to prevent fungus or other

buildup in your fuel tank.

Anti-siphon Valve

• The fuel system is equipped with an anti-siphon valve.

• The valve is located at the point where the fuel feed line attaches to the fuel tank.

• The valve is spring loaded and is opened by fuel pump vacuum.

• This valve will prevent fuel from siphoning from the tank in the event of a fuel line rupture.

NOTICE

• If an engine running problem is diagnosed as fuel starvation, check the anti-siphon valve. If

the valve is stuck or clogged, change or replace it while the engine is shut down.

• NEVER run the engine with the anti-siphon valve removed, except in an emergency.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Sin comentarios

Maxum 2400 SC3 Especificaciones Pagina 23